Thank you for purchasing the UniFold Shelter System. The best value in fast shelter technology! Set-up and Knock-Down Videos are at www.unifold.net/videos
First - Stand the shelter on the thick corner. This is the white box below shown from the top. Second - Grab the yellow handles and simultaneously pull diagonally apart and out as shown below. Flatten the floor to set the erected shelter.
Third - Put end posts in place if required.* * Anchor the shelter from wind loads by pegging the side guys from the shoulder of the roof to the ground SO THAT THERE IS NO TENSION IN THE SIDE GUYS unless the side wall of the shelter is pushed on from the outside. The telescopic posts combined with the front and back guys are key to snow load strength. With the posts in place the front and back anchor guys should be in tension (approximately 20 lbs) if heavy snow loads are anticipated. Congratulations! You now have a strong and tough shelter ready to protect you and your things. |
