Therminator™ Water Heater - This portable propane flash water heater features both flame and water temperature control to allow for on/off water demand. With no flow the burner turns off. When flow is restored, the burner turns on. The proportional flame control makes every pound of propane count with super efficiency. Propane tanks not included. Remove stack for storage.

MODEL H2O117 - ideal for most portable shower applications needing up to two shower heads

FUEL - Propane (1 or 2 20 lb tanks),
POWER - 117,000 BTU,
FLOW - 4 gpm @ 50 degree temp rise,
CONNECTION - 3/4" garden hose,
WEIGHT - ~80 lbs excluding propane tanks,
DIMENSIONS - 55"H X 26"W X 20"L (add 18" to H for stack)

MODEL H2O180 - ideal for military, sports teams, and medical decontamination, where up to 8 shower heads are required.

FUEL - Propane (1 or 2 20 lb tanks),
POWER - 180,000 BTU,
FLOW - 10 gpm @ 50 degree temp rise,
CONNECTION - 3/4" garden hose,
WEIGHT - ~80 lbs excluding propane tanks,
DIMENSIONS - 55"H X 26"W X 20"L (add 18" to H for stack)

Large Shelter Heater - This directly fired high air heater is approved for ducting from the outside. It provides enough power to heat our largest structures with the comfort and convenience of thermostat control. The high flow fan can overcome heat lost to an open door.

FUEL - Propane
POWER - 80,000 BTU for heat, 110VAC for fan and control
AIR FLOW - 450 CFM
CONNECTION - 10' L X 1' diameter accordion duct included
WEIGHT - 60 lbs
DIMENSIONS - 30"L X 20"H X 17"W Duct stores in 20"X12"

Small Shelter Heater - This indirectly fired air heater is ideal for up to 10'X18' shelters. It stays outside and is ducted into the structure with two ducts. One outlet and one return.

FUEL - Propane
POWER - 20,000 BTU for heat, 12 VDC for circulating fan
WEIGHT - 15 lbs

Shower Plumbing - Only UniFold provides a portable shower system with plumbing that is integrated with the structure. Just connect water and you're ready for showering off the team, the crew, or the horses.

Contain the runoff with optional shower basins that are integrated as well.

Water Distribution Manifold - The only thing better than hot water when you need it is to have hot water where you need it too.

This manifold gives you an additional hot and cold outlet. Add an inlet strainer to protect the heater's heat exchanger and you have trouble free operation with convenient connections for all.

Excellent for food service kiosks.

Shower Stall/Basin - For privacy and runoff containment, UniFold makes a line of sewn tarp stalls that clip into the structure and fold with it when it's time to go. Unclip it and use the structure for anything else between showers.

Picture shows optional 12 VDC drain pump used by hazmat teams.

Thermal Insulating Boots - The accordion profile of the roof and side-walls affords a significant air space to capture for insulation with a simple boot cover. Use them for extreme cold weather heat retaining efficiency.

They are also a great way to get the colour you want or the camoflage pattern using the standard blue and white shelter underneath.

HEPA Filters - Use them for environmental containment. Makes a cleanroom in seconds!

Traffic Barriers - These all plastic high visibility barriers fill with water and provide an excellent method for anchoring long covered walkways for spring and fall events.

They make great benches too.

Deployment Dollies - The fully optioned UniFold 3-2-1DECON! system can be a handful during deployment.

This dolly makes it easy for one person to get the system where it needs to be.

Power Supply (PS40) - This 12VDC 4 channel power supply is ideal for use with the TP1100 transfer pumps used in the decon systems. It has the ability to run 2 pumps simultaneously or 2 cigarette lighter adapters simultaneously. A handy option for flashlight, lap top, and radio recharging.

• Power requirement is 110VAC supply (5' pigtail)
• Power output is 2X12VDC @ 8A max (20' pigtail)